BLUETTI RV5 / B4810 Smart Kit 2 - 5000W, 10,240Wh Motorhome & Off-Grid Power System
We take orders for the Anker SOLIX range by bank transfer rather than through the website checkout. Get in touch and we will confirm stock, delivery and payment details.
A complete 48V off-grid power system for motorhomes, expedition vehicles, boats and cabins, supplied as one matched kit rather than a box of parts you have to make work together. The RV5 Power Hub replaces the separate inverter, inverter charger, solar controller, alternator charger and DC distribution that a build like this usually needs.
What's in the kit
- BLUETTI RV5 Power Hub - inverter, AC charger, MPPT solar charge controller and DC-DC alternator charger in one unit
- 2 x BLUETTI B4810 batteries - 51.2V LiFePO4, 5,120Wh each, 10,240Wh total
- BLUETTI Epanel - intelligent AC and DC distribution cabinet with breakers and protection in one enclosure
- BLUETTI EPad - touchscreen control and monitoring display
- Wiring to connect the system
Power you can actually use
5,000W of continuous 230V AC with a 10,000W surge, plus 1,620W of DC output. That runs an air conditioner, fridge, water pump and electronics together, rather than making you choose. It also feeds stable 12V and 24V circuits for lighting, pumps and onboard systems.
Charge it from shore power, solar, the vehicle alternator, a generator or an EV charger. Dual MPPT inputs mean the system balances whatever is available. BLUETTI quote 80% in 50 minutes on shore power, though that varies with conditions. An EV charging cable is not included.
Built for the road
- IP65 rated batteries with self-heating for cold starts
- Vibration resistant construction
- Runs under 50dB, so no constant fan noise inside the van
- Expandable - add further B4810 batteries for longer off-grid stays
Monitoring and control
The EPad gives you battery state, power draw, charging inputs and system health on one fixed touchscreen, with water level detection, temperature monitoring and system self-diagnostics. The same information is available on your phone over WiFi or Bluetooth, so you can check the system or switch the AC off without getting up.
Everything talks over CAN, so the hub, batteries and distribution cabinet share charging, demand and battery condition data continuously.
Specification
| AC output | 5,000W continuous, 10,000W surge, 230V |
| DC output | 1,620W |
| Battery capacity | 10,240Wh (2 x 5,120Wh) |
| Battery type | 51.2V LiFePO4, self-heating |
| Battery protection | IP65, triple protection |
| Solar input | Dual MPPT |
| Charging sources | Shore power, solar, alternator, generator, EV charger |
| Noise | Under 50dB |
| Control | EPad touchscreen, plus WiFi and Bluetooth app |
| Communication | CAN |
| Expansion | Additional B4810 batteries |
| Supply | Contact us to order |
One fitting note: for 12V auto-levelling systems drawing over 100A at startup, BLUETTI recommend pairing with a dedicated B1210 battery or the vehicle's existing 12V lead-acid battery.
Installation should be carried out by a competent auto-electrician or motorhome installer. We can arrange one.
Request a quote
Buying in volume, or need this as part of a larger order? We supply installers, fleets, dealerships and workshops across the UK with trade pricing and account terms.